Rotronic LOG-HC2 Universal Datalogger Manual de usuario descargar pdf (Pagina 29)

->30

Setup

Basic settings

This page describes the most commonly used settings – the Basic settings. Infor-

mation on further settings can be found on the following pages.

• Complete the preparations (->33).

• Start Setup (Setup symbol

• Edit the Basic settings according to your requirements.

• Transfer the new configuration and the start conditions to the logger with Write

basic settings.

Define the sensors from which the logger should record data, together with the storage

rate.

The 50Hz (3200 Hz) function is only available for the acceleration sensors (ACC).

50Hz (3200 Hz)

Acceleration values are measured at 3,200 Hz and saved at a frequency of approx.

50 Hz following digital filtration. Energy consumption increases for 50Hz (3200 Hz)

measurements.

Exit setup

Read the information

and measurement

parameters

Freezes the selected

options in the Basic

settings and Limits

tabs so that these

can be transferred to

other logger units ->32

Currently no data is being recorded (inactive)

(active: data recording in progress)

Name of the

logger ->33

Overwrite oldest

measurement param-

eters when memory

is full

Transfers the configuration, the start condi-

tions and the PC time to the logger

Stop data recording

Conditional record-

ing of measurement

parameters ->31

->33

Blue LED flashes during data re-

cording ( ->32)

->40

->39

Enter the main

storage rates

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

Comentarios a estos manuales

Sin comentarios

Rotronic LOG-HC2 Universal Datalogger Manual de usuario Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas Rotronic LOG-HC2 Universal Datalogger