Rotronic LOG-HC2 Universal Datalogger Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
21
SetupReaderViewerOnline
Overview
External processing of logger data is carried out using the LOG PC software pro-
grams Setup, Reader, Viewer and Online. The LOG PC programs can be used
for all logger types.
The Setup enables the properties of the logger to be customised to user’s re-
quirements.
The Reader allows the user to transfer measurement parameters to a Windows
PC. The Viewer is used to display data graphically or in table form or to export it
as a text file (*.csv).
With the help of Online (and the built-in display) users can view measurement
parameters and curves “live” on a PC.
Installation of the LOG PC software on a PC
For installation you will require Windows administrator rights.
Insert the CD containing the LOG PC software into the computer’s CD-ROM
drive. The installation procedure starts automatically*.
Completing installation
Initial installation: Select
Install USB driver.
Click on Finish.
The logger symbol appears on screen.
If the PC is not set up for automatic installation, proceed as follows:
1. Click Start > Run
2. Click Find > Look in: (set to CD drive).
3. Select the file Install_LOG_HC2.exe and Open.
4. In the Run dialog box click OK.
5. The installation process will begin.
6. Follow the instructions and select: Run LOG-program now.
7. During the initial installation select Install USB driver. See above, Complet-
ing installation.
PC software
* The program "Inno Setup" for installing the logger PC programs was written by Jordan Russell (www.jrsoftware.org, copyright Jordan
Russell).
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Comentarios a estos manuales

Sin comentarios